The Piper PA-18 Super Cub is a two-seat, single-engine monoplane. It was developed from the Piper PA-11. In close to 40 years of production, over 9,000 were built. Super Cubs are commonly found in roles such as bush flying, banner towing and glider towing.
As a relative of the popular 1400mm J-3 Cub, the 1700mm PA-18 Super Cub retains great flight characteristics while offering increased power and wingspan.
Thanks to its functional flaps, high-lift airfoil, rugged landing gear and oversized balloon tires- the 1700mm PA-18 Super Cub has impressive short take-off and landing (STOL) performance, allowing it to operate from just about any terrain.
Utilizing the latest FMS hardware and design, the 1700mm PA-18 Super Cub has pre-installed ball-link type pushrods, integrated servo connectors in the wing structure and can be assembled very easily using no glue at all.
For pilots wanting to get the genuine bush-plane experience, the PA-18 Super Cub can be equipped with floats.
Versatile, fun and exceptionally relaxing to fly- the 1700mm PA-18 Super Cub is a great addition to any fleet!
1, Updated with Reflex Flying controller, make the flying easier and more stable .
2. Powerful 3541- 750KV Outrunner motor with Predator 45A ESC provides adequate thrust for any situation.
3. CNC metal landing gear structure for less-than-perfect landings.
4. 6.25-inch oversized balloon tires for all-terrain operations.
5. STOL capable (Takes off in less than 3m/10ft)
6. Pre-installed navigation and landing lights
7.Two-piece wing and horizontal stabilizer for easy transportation
8. High-strength carbon fiber wing spars
9.Integrated servo connectors
10. Screw-together assembly
11.Large battery bay
12.Ball-linked pushrods for increased precision
13.Tough two bladed Nylon propellers
14. Functional flaps
15. Optional floats and stainless-steel wing struts
Overall Length 1136MM/44.7in
Flying Weight Around 2200g
Motor Size Brushless 3541-KV750
Servo 17g Servo x 6
Radio 6 Channel (not included)
CG (center of gravity) 80-85mm (From Leading Edge)
Prop Size 12 x 7, 2-blade propeller
Recommended Battery Li-Po 14.8V 2200-2600mAh(not included)
Approx. Flying Duration 5 minutes
Minimum Age Recommendation 14+
Experience Level Beginner
Recommended Environment Outdoor
Assembly Time 45 minutes
Is Assembly Required Yes
Material Durable EPO (foam)
PNP: Plug and Play, everything included except transmitter, receiver, battery, charger
PNP without Floats: PNP + Landing Gears
PNP with Floats: PNP + Landing Gears + Floats
About Reflex Flying Controller System:
1, This product is NOT a toy. Adult supervisition is required for these under 14 years old.
2, Warnings in the instructions should be read carefully and heeded.
3, This plane is for experienced and advanced pilots only.
4, Improper usage and adjustment will result in crashes and damage to the item.
5, Experience is required prior to handling this product.
Note: the airplane you receive will not contain the glue (glue is a forbidden object which will be taken out for air shipment), please prepare by your own.
The electronic parts included in the plane you receive may be a little different from what we listed, but are all 100% FMS original.