GPS&GSM Quad-band Real-time Tracking & location and history track playback;
External Microphone realize remote monitoring
External SOS button and alarm and speakers
External Relay realize remote engine power & oil offAlarm function: Speeding, Vibration, Geo-fence and illegal shift Alarm by real-time SMS
Built-in battery (support overtime standby & alarm when Electricity Cutting or lower power)
Firmware Auto recovery function
OBDII interface simply installation(optional)
IOS, Android APP software in set, also support WeChat tracking on line
Net weight: 62g, Size: 8.9*4.5*1.9cm
GPS ANTI-THEFT ALERT SYSTEM
Fast Installation Instruction & User Manual
In order to install and operate the GPS tracker in right method and properly, please read this Fast Installation Instruction & User Manual before installation, Thank you.
4 P Power Cord *1; Relay*1; SOS Button*1; Loudspeaker wire*1; Microphone*1; User Manual *1; Certificate of Approval*1; Warranty Card*1; Battery*1
GSM Quad-band frequency (Global use);
Wide input voltage range: DC 9-24V;
Build-in vibration sensor, Smart Anti-theft;
ACC ignition detection, vehicle status notification;
External SOS button, used in immergence case use;
Build-in back up battery, support illegal main power cut-off alarms ;
External Relay, used to cut off engine power or oil remotely;
External Microphone, used in voice monitoring case ;
External Loudspeaker, used in phone calls or alarms case ;
Movement Alarm ;
GMS frequency: 900/1800MHz and 850/1900MHz;
Voltage range: DC 9-24V
Standby Current: ≈0.2mA;
Power Consumption: 0.3w/h;
GPS initialization: Cold boot 38s(Open sky)
Warm boot 2s (Open sky)
GPS Accuracy: 10m(2D RM);
Working Temperature: -2 – +70
Working Humidity: 20%-80%RH;
Net weight: 45g;
LED Red ,Yellow, Blue flash together, the device is working normally.
Red LED (Power Indicator): No flash, power supply error, please check the input,voltage and related wiring status;
Yellow LED (GSM Indicator): No flash, GSM/GPRS error, please check the SIM card installation ,SIM card balance, and GPRS functions, etc.
Blue LED (GPS Indicator): No flash, GPS signal cannot be received, please check that whether anything metal or contain metal block the signal or in the GPS blind zone.
Open the package, please look over whether the part number is correct and whether accessories complete, if not, please contact your distributor for further assistance;
Choose correct SIM card, a SIM card will be needed to insert into the terminal, please consult distributors options for further use;
Install SIM card, SIM card slot On the terminal back, take out the SIM card slot cover, insert the SIM card, then put the cover back to terminal;
Power off before SIM card operations;
Please make sure that the SIM card has enough credit;
Special GPRS data SIM Card suggested (GSM network only);
The terminal is a high-tech GPS positioning device, choose distributor suggested professional installation company, mechanic to install and set-up;
Please follow the terminal installation order, DO NOT REVERSE, during the installation, DO NOT POWER UP THE TERMINAL;
Suggest install in hidden places;
In order to keep it from theft’s damage, hidden place installation suggested;
Please avoid to install along with or near transmitter, ie: Reversing radar, other anti-theft vehicle terminals;
Use ribbons to fasten the terminal, or strong double-faced adhesive tape;
The GSM and GPS antennas’ signal receiving side shall face the sky, and no shield materials to block the signal, ie: metal; Also it shall avoid to interfere signals, 2 antennas separate installation suggested;
Installation place suggested:
Any metal heat shield layer or heating layer will reduce the signal of GPS, it may cause GPS function failure, please adjust the installation place;
The terminal standard power voltage is 9V-24VDC, please use the original power wire supplied by the original factory, red wire is power source positive end, black wire is the negative end; The black wire be connected with spate ground wire, DO NOT CONNECT WITH OTHER GROUND WIRES;
Yellow AAC detection wire,the ACC wire shall connected with the ACC switch, the terminal will decide vehicle status by ACC status, engine on or engine off, also determines the terminal data upload time interval, engine on status: 15seconds, engine off status: 5 minutes;
Engine control relay wiring
Oil pump relay connections: ignition coil with small white wire (85) and small yellow wire (86), small white wire (85) connects with the vehicle power source negative end, small yellow wire (86) connect with the terminal relay control wire;
The controlled vehicle oil pump, cut the oil pump positive wire, the oil pump positive end shall connect with the thick green wire (87a) which is the normally closed end, the another end connect with the relay public end the thick green wire (30);
SOS wire (2 pin)
Connect with the external SOS switch button, used in emergency case for help;
Loudspeaker wire (2 pin)
Connect with the external vehicle speaker, with a microphone, it can make 2 ways phone calls, or send voice alarms when theft behavior was detected;
MIC wire (2 pin)
Connect with external microphone, used in voice monitoring case or phone calls;
Start-up: insert the SIM card, turn on back-up power supply, the terminal will start up;
Shut-down: disconnect power plug, take out the SIM card, the terminal will shut down;
All beginning letters in each parameters’ commands shall use upper-case letters, all punctuations shall be English punctuation, only part of commands will reply.
By sending enquiry commands to the terminal, corresponding contents will be replied.
Commands shall be sent by the bound cellphone number.
Cellphone SIM Card Number Binding
After the terminal start up normally, please bind your cellphone number first, alarms will send to this bound number.
Send SMS: *ZC#terminal password# Cellphone SIM card number#Terminal SIM card number#
Initial password is 000000, command start with *
Send SMS: *MP#Previous terminal password#new terminal password#
Initial password is 000000, new password is 987654
Get Terminal Position by SMS
Send SMS: DW to terminal, it will reply the terminal current geography location
e.g.: south east 30 meters, ABC company, Meilong Rd, Shenzhen, Guangdong Province
Please note: the default time is Greenwich time, actual time needs to add your time zone number
e.g.: enquiry time is 12:00:00, Chinese time is 20:00:00 (+ 8 hours)
When the vehicle was stolen, the administrator can send Cut-off Engine command via the live tracking monitoring system, Under the conditions of safe driving, the command will trigger the relay to cut off power of oil pump to stop the engine, and it can’t be re-start the engine without restore engine command.
To secure the safety of vehicle, the terminal shall in valid GPS signal status, also speed under 20km/h or still status to cut off engine.
After the theft alarm dismissed, send restore engine command via live tracking monitoring system will trigger relay to restore the power of oil pump, the vehicle will able to start up.
Cut off Oil pump power
Send SMS: DYpassword to terminal, and reply: Config ok
Restore Oil pump power
Send SMS: TYpassword to terminal, and reply: Config ok
Intial password is 000000
Alarm Method Settings
Send SMS to set the alarm method:
KC0 : Close all arlms;
KC1 : SMS alarm;
KC2 : Phone call alarm;
KC3 : SMS+Phone call alarm;
Default Alarm status:
Park still status (ACC): Vibration Alarm On;
Driving Status (ACC): Vibration Alarm Off;
Send SMS: SF to turn on vibration alarm;
Send SMS: CF to turn off vibration alarm;
Movement Alarm on when the vehicle is at vibration alarm on status.
Turn Off SMS Command: *MVALMOFF#000000#
Turn On SMS Command: * MVALMON#000000#
Condition Set SMS Command: *MVALM#000000#Speed#Vibration Times#
3: Speed>=3km/h & 10 time vibration detected, then movement alarm triggered.
Any emergency case happens, press the SOS button for 3 seconds, trigger the SOS emergency help alarm, the terminal will call the bound cellphone number repeatedly, in nobody answers case, it will ring max 3 times, at meantime, the terminal will upload SOS alarm information to live tracking monitoring system.
Main Power Cut-Off Alarm
After the terminal main power been cut, it will automatically trigger power cut off alarm, it will send a main power cut off alarm SMS to bound cellphone, and meanwhile upload the alarm information to live tracking monitoring system.
SMS e.g.: Alarm main power failure, Please pay attention!
Send SMS: JT to the terminal
The terminal will call back and the administrator will able to monitor the voices.
Bound cellphone calls the terminal, after it gets through, the administrator can talk with the driver via the loudspeaker and microphone connected with the terminal.
English, Chinese, Spanish, French, Portuguese, German, Vietnamese, Russian, Thai, Arabic.
If you already have an login account and password information, you can login our platform directly, or please contact your distributor and ask them to open you an account and provide you the password.
Input the address link in your computer brower, input the account and password, then login to your service platform.
About the use method of platform, please ask your distributor for Service Platform User Manual.
Download APP for Cell phone, Public Account for Wechat to check
Open the website in computer, and scan the following Bar code,down the app
and add the public account
Is main power correct? Do not connect it with the vehicle internal control wires;
SIM card installation right, please check the installation instruction;
Is ACC wire connected? After connected with ACC wire, insert the key and open ACC;
Check the LED indicators, When the terminal work normally, Red LED (GSM) flash slowly, Green LED (GPS) flash slowly;
Is GPS module receives GPS signal? If not, please take it to open sky and wait the first positioning is done;
First check the 2 LED indicators and confirm if it is normal, if it is inconvenient to check the LEDs, then check the SIM card status first, steps as follow:
GPS VEHICLE TRACKING TERMINAL WARRANTY CARD
Any upgrade of this products later on , notifications will only be sent to distributors;
Any changes on appearance or colour, pictures are only for information, take practicality as standard;
The warranty card only suits the following IMEI terminal;
Please keep the warranty card safe, also show the warranty card and original purchase receipt before repair services;
Specific warranty range as follow;
This warranty card is a basic access to repair service, please fill out the table carefully and keep it safe.
Contact phone No.
Warranty period expired;
Damages caused by unauthorized tear down or repair;
Inundate, damage, PCB burnt due to improper act;
Terminal out cover, screen, antennas damages due to use;
Terminal inside IMEI’s been pluck away or unable to read;
Warranty card any content is not in accordance with the terminal, or warranty card has been modified by unauthorized;
Damages caused by force majeure;
5 Stars (0)
4 Stars (0)
3 Stars (0)
2 Stars (0)
1 Star (0)
|Shipping Company||Shipping Cost||Estimated Delivery Time|
|3 - 7 days|
|3 - 7 days|
|5 - 14 days|
|Post Air Mail||Free Shipping||15 - 45 days|
|Return Policy||If the product you receive is not as described or low quality, the seller promises that you may return it before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe) and receive a full refund. The return shipping fee will be paid by you. Or, you can choose to keep the product and agree the refund amount directly with the seller.
N.B.: If the seller provides the "Longer Protection" service on this product, you may ask for refund up to 15 days after order completion.
|Seller Service||On-time DeliveryIf you do not receive your purchase within 60 days, you can ask for a full refund before order completion (when you click "Confirm Order Received" or exceed confirmation timeframe).|